World Express Mapping SmartDrive SD1000 Bedienungsanleitung PDF herunterladen (Seite 13)

SmartDrive SD1000 GPS Navigator User’s Guide

World Express Mapping Sdn. Bhd.

Putting it all together in your vehicle

Windshield Mounting

1. Slide the magnetic cradle onto the mounting arm/bracket

assembly.

2. Take the power lead, and plug it into the socket on the rear

of the cradle. Don't connect the other end to the cigar lighter

socket yet.

3. Place the suction cup flat against the windshield, and adjust

the position so you can easily see the display screen. But

please make sure that the device does not obstruct the driver’s

view, or interfere with the operation of vehicle airbags and safety

devices. Flex the goose-neck support arm until the display is in

the right position.

4. Press the suction cup firmly against the windshield and push

the suction lock up towards the suction cup. To release the

suction cup, pull the lock back towards the support arm and

lift the plastic tab. NOTE: Be ready to support the device when

it releases from the windshield.

5. Pull the lever upwards to apply suction. For maximum

adhesion, it may help to dampen the suction cup beforehand.

NOTE: Before attaching the suction cup, clean the inside of your windshield

with a standard window cleaner and a lint-free cloth.

GPS antenna is installed at the top of SmartDrive SD1000 (i.e. next to the Power

On/Off button). Make sure that the GPS antenna has a clear view of the sky.



1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 57 58

Keine Kommentare

World Express Mapping SmartDrive SD1000 Bedienungsanleitung Seite 13